1/10 1. scope of application these data sheet is applied to the chip type led lamp, model cl-l233-c13n1-c. 2. part code c l - l 2 3 3 - c 1 3 n 1 - c series l233 : white power led for general lighting. watt class c13 : 13 watt package. lighting color n1 : compliance with ansi c78.377-2008, correlated color temperature 5000k. symbol data sheet citiled name cl-l233-c13n1-c citizen electronics co.,ltd. japan ref.ce-p1099 04/11
2/10 3. outline drawing 4. performance ( 1 ) absolute maximum rating symbol unit power dissipation p d w forward current i f ma forward pulse current i fp ma *1 reverse current i r ma operating temperature t op c storage temperature t st c junction temperature tj max c *2 *1 forward current : duty<=1/10 , pulse width<=10msec *2 d.c. current : tj = tc + rj-c p d pulse current : tj = tc + rj-c pw(power dissipation / one-pulse) duty symbol citizen electronics co.,ltd. japan parameter rating value 32.8 1,440 data sheet citiled name cl-l233-c13n1-c 1,500 -30 ~ +85 150 -40 ~ +100 1 marking1 marking2 it has a protection device built in as a protection circuit against static electricity. unit : mm tolerances unless otherwise specified : 0.3 anode cathode protection device 12 12 12 marking1 : serial no. marking2 : e n1 n1 e.g. e : typ.65 color e.g. ra ref.ce-p1099 04/11
3/10 ( 2 ) electro-optical characteristics ( tc=25 c ) symbol condition min. typ. max. unit v f i f =720ma 17.5 18.6 21.0 v v i f =720ma 1190 1400 - lm ra i f =720ma 60 65 - - rj-c junction-case - 2.4 - c/w chromaticity coordinates ( condition : i f =720ma ,tc=25 c ) note: the tolerance of measurement at our tester is v f 3% , v10% , chromaticity(x,y)0.005. symbol data sheet thermal resistance parameter forward voltage luminous flux general color rendering index cl-l233-c13n1-c citizen electronics co.,ltd. japan citiled name x y center 0.3447 0.3553 (5028k) a 0.3551 0.3760 b 0.3376 0.3616 c 0.3366 0.3369 d 0.3515 0.3487 0.3551 0.376 n1 color rank x-y chart-cie1931 0.33 0.34 0.35 0.36 0.37 0.38 0.32 0.33 0.34 0.35 0.36 0.37 x y color region b.b. locus 4800k 5400k 5000k 4600k 5200k ref.ce-p1099 04/11
4/10 5. characteristics ? forward current vs. forward voltage ? forward current vs. relative luminous flux ? forward current vs. chromaticity coordinate ? case temperature vs. chromaticity coordinate symbol citiled name data sheet cl-l233-c13n1-c citizen electronics co.,ltd. japan -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0 300 600 900 1200 1500 i f [ma] ?x, ?y ?x ?y 0% 30% 60% 90% 120% 150% 180% 0 300 600 900 1200 1500 i f [ma] relative luminous flux [a.u.] 16.0 17.0 18.0 19.0 20.0 21.0 0 300 600 900 1200 1500 i f [ma] v f [v] -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0 20 40 60 80 100 120 140 tc [c] ?x, ?y ?x ?y i f =720ma tc=25c tc=25c tc=25c ref.ce-p1099 04/11
5/10 ? case temperature vs. forward voltage ? case temperature vs. relative luminous flux ? spectrum symbol citiled name cl-l233-c13n1-c data sheet ? case temperature vs. allowable forward current citizen electronics co.,ltd. japan 16.5 17.0 17.5 18.0 18.5 19.0 19.5 0 20 40 60 80 100 120 140 tc [c] [v] 0% 20% 40% 60% 80% 100% 120% 0 20 40 60 80 100 120 140 tc [c] relative luminous flux [a.u.] 0% 20% 40% 60% 80% 100% 120% 350 450 550 650 750 850 [nm] relative emission intensity [a.u.] 0 200 400 600 800 1000 1200 1400 0 25 50 75 100 125 150 tc [c] i f [ma] i f =720ma i f =720ma tc=25c,i f =720ma ref.ce-p1099 04/11
6/10 6. reliability (1) details of the tests (2) judgment criteria of failure for reliability test (ta=25 c) symbol v f v u defines the upper limit of the specified characteristics. s defines the initial value. cl-l221-c14l1 reliability test results will be used for cl-l233-c13n1-c. symbol citizen electronics co.,ltd. japan judgment criteria for failure ta=25 c, i f =720 ma 1000 hours(with al-fin) ta=80 c, tj P 120 c, i f =720 ma 1000 hours(with al-fin) moisture-proof test forward voltage continuous operation test low temperature storage test 60 c, 90 %rh for 1000 hours test item test condition data sheet -40 c 30 minutes C 100 c 30 minutes, 100 cycle > u 1.1 < s 0.85 returned to the normal ambient conditions after the completion of each test. total luminous flux measuring item citiled name cl-l233-c13n1-c note: measurement shall be taken between 2 hours and 24 hours, and the test pieces should be -40 c 1000 hours high temperature storage test 100 c 1000 hours thermal shock test i f =720ma i f =720ma measuring condition ref.ce-p1099 04/11
7/10 7. packing specifications (1) packing an empty tray is placed on top of a five-tier tray which contain 40 pieces each. the set of six trays is banded together with two rubber bands. (smallest packing unit: 200 pieces) a label with product name, quantity, lot number is placed on the upper empty tray. tray (dimensions: 310 210 14.6mm / materials: electrically conductive ps) symbol data sheet citiled name cl-l233-c13n1-c citizen electronics co.,ltd. japan < packing figure > product 40pcs/tray 310 210 14.6 14.6 1. type e.g. cl-l233-c13n1-c 2. p.no. (cutomer's p/n) e.g. xxx 3. lot no. e.g. 03d001 - first letter: last digit of the year e.g. 0 : year 2010 - second letter: production month e.g. 3 : m ar note: october, november and december are designated by x, y and z, respectively. - third letter: ce's control number e.g. d001 4. quantity e.g. 200 pieces < example of indication label > customer pass citizen electronics type p.no lot no q'ty cl-l233-c13n1-c xxx 03d001 200 pcs. ---(1) ---(2) ---(3) ---(4) ref.ce-p1099 04/11
8/10 8. precautions 1. avoid the application of any stress to the resin portion. 2. avoid any contact by a sharp metal nail or other materials with the resin portion. 3. this product should be secured firmly by fastening an m3 screw on both sides of the product. please be careful not to apply any stress to the product during the clamping operation. please check thoroughly. 4. insulation between the terminal section and the heat sink section of the led is not covered by warranty. with regard to insulation after this product has been assembled in an apparatus, preventive action should be carried out by the customer. 5. for fixing this product to the outer heat sink, heat grease should be applied to the whole rear surface so that the product can dissipate heat as a whole. please pay attention to avoid product deformation when conducting the clamping operation with heat grease in sheet form. 6. handling of static electricity - these products are sensitive to static electricity charge. please take measures to prevent any static electricity being produced such as the wearing of a wristband or anti-static gloves when handling this product. - all devices, equipment and machinery must be properly grounded. it is recommended that precautions be taken against surge voltage to the equipment that mounts the leds. - esd sensitivity of this product is 1000v (hbm, based on jeita ed-4701/304). - when inspecting the final products in which leds were assembled, it is recommended to check whether the assembled leds are damaged by static electricity or not. - it is easy to find static-damaged leds by a light-on test. symbol data sheet judgmental criterion citiled name cl-l233-c13n1-c as the connection status could vary depending on materials of outer heat sink, condition i f =12ma/pkg no-lighting in entire block making up parallel circuit is unacceptable citizen electronics co.,ltd. japan resin portion (shaded area) l233 consists of three blocks. recommended installation screw pitch thermal conduction materials (insulation) outer heart sink spring washer ( Q 6mm) m3screw (insulation) plane washer ( Q 6mm) 19.5mm 11.0mm ref.ce-p1099 04/11
9/10 8. precautions (continued) symbol 10. heat generation a minimum current value of lighting of all dice is 60ma. when a minimal current is applied, led dice may look different in their brightness due to the individual difference of the led element, and it is not a failed product. data sheet 9. drive circuit 8. please be aware that this product should not come into contact with any other parts - for soldering correction - next process of soldering should be carried out after the product has returned to ambient - a constant current circuit is recommended as a drive circuit. and when two or more led packages are connected, the series connection between each package is recommended. - please design a circuit that prevents any reverse voltage (excess current) from being applied to this product instantaneously when the circuit is on or off. - soldering shall be implemented using a soldering bit of 40w or less with a temperature 350c or less within 3.5 seconds for one land. * citizen electronics cannot guarantee if usage exceeds this recommended conditions. please use it after sufficient verification is carried out on your own risk if necessary. please ensure that heat generation is not in excess of the absolute maximum rating. (refer to 4-1 performance) - regarding soldering correction, above conditions shall be used. (recommended condition in a case of lead-free solder condition) - no external force shall be applied to resin part during soldering. - contacts number of soldering bit should be within twice for each terminal as a correction. - manual soldering 12. other - this product complies with rohs directives. in assembled status. 7. lighting at a low current 11. recommended soldering condition (this product is not adaptable to reflow process) - as this product is designed with consideration of the heat release property of module, a heat release design is required to use this product efficiently. - factors responsible for an increase in temperature include heat generation attributed to ambient temperature conditions or power dissipation. thus, drive conditions should be taken into consideration, depending on ambient temperature (ta). citiled name cl-l233-c13n1-c citizen electronics co.,ltd. japan ref.ce-p1099 04/11
10/10 such information, however, is subject to change without any prior notice. included in this document, business interruption and loss of data, and disclaims any and all express or implied warranties and for providing adequate designs and safeguards to minimize risk and avoid situations symbol in which a malfunction or failure of a product could cause loss of human life, 5. though citizen electronics works continually to improve products' quality and reliability, sale for product, and to the maximum extent allowable by law, citizen electronics assumes no liability whatsoever, including without limitation, indirect, consequential, special, or incidental damages or loss, including without limitation, loss of profits, loss of opportunities, products can malfunction or fail. customers are responsible for complying with safety standards citizen electronics assumes no liability for customers' product design or applications. bodily injury or damage to property, including data loss or corruption. in addition, customers are also responsible for determining the appropriateness of use of any information contained in this document such as application cases not only with evaluating by their own but also by the entire system. 4. absent written signed agreement, except as provided in the relevant terms and conditions of or conditions of merchantability, fitness for a particular purpose, accuracy of information, and conditions related to sale, use of product, or information, including warranties or no infringement. a result of errors or omissions in the information included in this document. but citizen electronics assumes no liability whatsoever for any damages incurred as rights of citizen electronics or any third party with respect to the information before purchasing or using any citizen electronics' products listed in this document, in this document. 2. all information included in this document such as product data, diagrams, charts, is current as of the date this document is issued. and formal specifications must be exchanged and signed by both parties prior to mass production. 3. citizen electronics has used reasonable care in compiling the information products are used as intended. citizen electronics neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any any other please confirm the latest product information with a citizen electronics' sales office, 1. this document is provided for reference purposes only so that citizen electronics' name cl-l233-c13n1-c citizen electronics co.,ltd. japan data sheet 9. precautions with regard to product use 6. please contact citizen electronics' sales office if you have any questions regarding the information contained in this document, or if you have any other inquiries. citiled ref.ce-p1099 04/11
|
